Our Knowledge Base has changed location, the new website is https://knowledge.star2star.com

Community

Panasonic KX-TGP600 Cordless IP Phone

Panasonic KX-TGP600 Cordless IP Phone

(Note) added in Portal/Extensions via the DECT Phone option)

Panasonic_TGP600.png(Basic Bundle - Base Station and KX-TPA60 Cordless Handset)

Screen_Shot_2016-09-19_at_10.41.56_AM.png 

 

The entry model features a base unit that can be wall mounted and a cordless handset.

  • Support for up to 8 DECT handsets / up to 8 SIP registrations / 4 handset options (see below)
  • Up to 8 simultaneous network conversations with no repeater. Up to 4 calls when using a repeater
  • Up to 6 wireless repeaters can be connected to extend range (Programmed via TPA60/65 handsets)
  • Easy setup and maintenance
  • 1.8-inch, 65,000-color TFT display on cordless handset
  • Noise reduction
  • Up to 500 phonebook (manual entry)
  • 200 hours standby time / 11 hours talk time
  • Compatible with various optional handset type

Handset Options (including the KX-TPA60 which is included in the Base Package)

P1020125-Edit.jpg

KX-TPA65 (Wireless Desk Phone)

Full access to [MENU] -> [System Settings]

P1020122.jpg

KX-UDT121(Cordless Handset - Slim & Light Model)

No access to [MENU] -> [System Settings]

P1020115.jpg

KX-UDT131 (Cordless Handset - Tough Model)

No access to [MENU] -> [System Settings]

P1020120.jpg

KX-TPA60 (Cordless Handset)

Full access to [MENU] -> [System Settings]

 

  • An easy-to-manage solution
    The KX-TGP600 is remarkably easy to set up and manage. Its provisioning function enables remote configuration settings and handset management. Users can choose from two maintenance methods – local management with a base unit, or service provider management.
  • A fully expandable solution
    Users can connect as many as eight DECT wireless handsets to the system. With the ability to use up to eight outside SIP lines simultaneously, customer service becomes more efficient, and the cost and effort of installing and managing separate outside lines are removed completely.
  • A high-quality solution
    A noise-reduction function reduces surrounding noise and enhances the clarity of the call at the press of a button. The KX-TGP600 also automatically adjusts the receiver volume to an easy-to-hear level if the user moves from a quiet area to somewhere noisier.
  • A cost-saving solution
    The combination of quality, reliability, ease and flexibility add up to a significant reduction in the overall cost of ownership of the KX-TGP600. Add this to a low initial cost and you have a system that offers far greater return on the user’s investment over the lifetime of the technology.
  • A stylish, specialist solution
    There are a wide variety of handsets which are compatible with the KX-TGP600. Among those is the KX-TPA60 DECT wireless handset, offering a 1.8” colour LCD with backlight, and 500 phone book address/20 last dialed number memory. There’s also the KX-TPA65 wireless desk phone, which offers a significant advantage over ‘traditional’ desk phones, as its DECT capabilities mean no additional cabling is required when the system is being installed. The coverage area of the base unit is approximately 300m outdoors and 50m indoors, depending on the environment. Because some users require greater coverage, the system can include optional repeaters, which can expand the practical communication area up to a maximum of around 200m indoors.

           KX-A406.png

  • Enabled via TPA60/65 handsets   
  • Up to 6 KX-A406 wireless repeaters can be registered with the KX-TGP600 base
  •     Up to 4 calls simultaneously when using a repeater
  •     Up to 3 KX-A406 wireless repeaters can be connected in a cascade connection in either direction (per image below)

Screen Shot 2016-10-11 at 9.30.06 AM.png 

Up to 8 units can be registered to the KX-TGP600. (Note: 6 repeaters and 8 extensions which can be a mix of handsets TPA60, TPA65 (cordless deskphone), UDT 121, UDT 131)

To enable repeater mode for your phone (KX-TG_600, TPA60, TPA65, UDT 121, UDT 131)

  •     Go to the Star2Star Portal
  •     Go to Portal/Multi-Extension Devices
  •     Enable Repeater Mode
  •     Save Changes to System
  •     Reboot the phone

Note: See Adding a Multi-Extension Device in the Portal here as a pre-requisite for the above instructions.

Screen Shot 2016-10-12 at 11.41.12 AM.png

Screen Shot 2016-10-12 at 11.44.03 AM.png

Configuring for Local (Remote) Use

The Panasonic cordless phone gets its configuration automatically from the local StarBox. Prior to shipping any Panasonic phone Star2Star will upgrade the device to the latest, compatible, approved and tested firmware. Each phone will be connected to a local StarBox to download its local or remote configuration based upon the Extension Portal settings.

  1.     (NOTE) This procedure can only be carried out with the extension connected to the local StarBox.
  2.     Log into the portal.
  3.     Click the Configuration tab under view/edit for the designated location.
  4.     Click Extensions > select extension required.
  5.     Click the check box marked ‘remote extension’.
  6.     Enter the physical address the phone will be residing at.
  7.     Click save changes at the bottom, then Save Changes to System at the top of the screen. Note: this may take up to 15 minutes for changes to take effect.
  8.     Once the portal has saved changes, reboot the phone on the existing network (the current Star2star location).
  9.     During reboot, the phone will get the remote configuration file.
  10.     The phone should now have a Data IP address, the same scheme as a computer on the same environment.
  11.     This phone is now ready for remote use.
  12.     Remember this device is not PoE and requires a power supply (supplied with each Panasonic cordless phone).
  13.     To return the remote extension to its original local setup, repeat the above procedure however un check the remote setting in Extensions.
  14.     Click save changes at the bottom, then Save Changes to System at the top of the screen. Note: this may take up to 15 minutes for changes to take effect.
  15.     Connect the phone to the local StarBox.

 

0 Comments

Article is closed for comments.
Powered by Zendesk