Our Knowledge Base has changed location, the new website is https://knowledge.star2star.com

Community

How to Reboot a StarBox 5500

                    Booting the StarBox 5500 

300px-StarBox_5500.JPG

  • Connect the StarBox 5500 as per the diagram.
  • Press & release the red power button, located towards the right corner of the front panel next to the LEDs.
  • The last light on the LED panel, will turn off and StarBox 5500 will power down in approximately 5 seconds.
  • Press & release the red power button, located towards the right corner of the front panel next to the LEDs.
  • The fan will start (loudly at first).
  • The last light on the LED panel, viewed from left to right, is the power LED, and will illuminate.
  • Typically, it takes approximately 3-1/2 minutes for the StarBox 5500 to boot and load all services.
  • On occasion, it may take up to 10 minutes for the StarBox 5500 to boot and load all services, if it performs a file system check.

0 Comments

Article is closed for comments.
Powered by Zendesk